this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * -l: .000010 gold on contact area, .000100-.000250 tin on tail (use c-133-xx-l) -s: .000030 gold on contact area, .000100-.000250 tin on tail (use c-133-xx-s) -stl: .000030 gold on contact area, .000200 tin lead on tail (use c-133-xx-stl) -ltl: .000010 gold on contact area, .000200 tin lead on tail (use c-133-xx-ltl) -lm: .000010 gold on contact area, .000100-.000250 matte tin on tail (use c-133-xx-l) -sm: .000030 gold on contact area, .000100-.000250 matte tin on tail (use c-133-xx-s) do not scale from this print fsi-1xx-xx-xxx-d-x-xx-xx no of positions body height row specification alignment pin location -d: double row (for -06 body: use fsi-xx-06-d-xx-x) (for -10 body: use fsi-xx-10-d-xx-x) threaded: -10, -20, -25, -30, -40, -50 non-threaded: -05 thru -50 [in multiples of 5] -06: 6mm (use c-133-02-xxx) -10: 10mm (use c-133-03-xxx) -at: top side (use fsi-xx-xx-d-at-x) -ab: bottom side (use fsi-xx-xx-d-ab-x) -ad: dual (top & bottom) (use fsi-xx-xx-d-ad-x, see fig 2) *-lc: locking clip blank for no alignment pin. plating -e: threaded insert (english) (use ins-19-2-56-157, see fig 3, sht 2) -m: threaded insert (metric) (use ins-19-m2-157-n, see fig 3, sht 2) blank for non-threaded insert. threaded insert option option -tr: tape & reel packaging blank for tubed parts. -p: (for availability, see fig 4, sheet 3) -k: polyamide film pad (use k-500-300)(see fig 5, sheet 3) (available only on positions 40 & 50 with any threaded insert options) * = not tooled .0060 0.15 "b" (see table 1) 2 max sway "a" "a" 'c' fsi-xx-xx-d c-133-xx-xxx c (no of pos x .03937 [1.00]) +.030 [.76] .355 ref 9.017 .405 .008 [10.28 .20] .014 ref 0.36 {(no of pos - 1) x .03937 [1.00]) +.005 [.13] c .324 ref 8.23 .006 0.15 ref .035 0.88 section "a"-"a" c see table 2 see note 8 .050 ref 1.27 .013 ref 0.32 .01 0.25 detail 'c' scale 5.5 : 1 see note 7 "c" (see sht. 1, table 1) in-process 1 [shown with carrier] "d" (see sht. 1, table 1) in-process 2 [shown with carrier] fig 1 c 01 19 02 20 c (fsi-110-06-xxx-d shown) sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.25] 2 .xxx: .005 [.13] .xxxx: .0020 [.05] material: 1mm single element interface by: fsi-1xx-xx-xxx-d-x-xx-xx dwg. no. description: do not scale drawing bratcher 1/29/99 3 1 sheet scale: 2:1 insulator: lcp, color: black contacts: c-133-02-x: becu c-133-03-x: becu insert: brass f:\dwg\misc\mktg\fsi-1xx-xx-xxx-d-x-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force: 12 oz. 3. load inserts in the direction of the arrow using thermal insertion machine. 4. threaded insert must be able to handle 35 in-oz's of torque min without rotating or "loosening". 5. threaded insert retention to be 20 lb min. 6. for -05 pos with -ppp option, leads may not be visible by some optical machines. 7. hot bar form after assembly (will produce retention flange as shown). 8. maxium allowable shear burr:.003[.08], in direction shown. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision as
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * .275 ref 6.985 + .555 [14.10] ref (no of pos x .03937 [1.00]) + .285 [7.24] (no of pos x .03937 [1.00]) "b" "b" fsi-xx-xx-d-t -m & -e: threaded options (fsi-110-06-l-d-m shown) (equations apply to -10, -20, -25 & -30 only) .015.005 0.380.13 section "b"-"b" see table 3 see note 3 load insert from top (no of pos x .03937 [1.00]) + .870 [22.10]ref (no of pos x .03937 [1.00]) + .600 [15.24] ref (no of pos x .03937 [1.00] / 2) + .300 [7.62] ref for -40- & -50 with -m or -e option (fsi-150-06-l-d-m-ad shown) (no of pos x .03937 [1.00]) + .276 [7.00] ref alignment pin option for -40- & -50 with -m or -e option (fsi-150-xx-l-d-m-ad shown) .055 ref (typ) 1.397 .042 dia ref (typ) 1.067 .055 ref 1.40 (no of pos -1) x .03937 [1.00] ref -at location -ab location -ad location fig 3 * metric threaded inserts to be flash nickel plated * (fsi-110-06-l-d-ad shown) alignment pin options fig 2 c sheet of 1mm single element interface by: fsi-1xx-xx-xxx-d-x-xx-xx dwg. no. description: do not scale drawing bratcher 1/29/99 3 2 sheet scale: 2:1 revision as f:\dwg\misc\mktg\fsi-1xx-xx-xxx-d-x-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by samtec, inc. this document shall not be disclosed, in whole or part, to any unauthorized person or entity nor reproduced, transferred or incorporated in any other project in any manner without the express written consent of samtec, inc. proprietary note * * .570 ref 14.48 .200 ref 5.08 "p" "m" fig 4 -p: pick & place pad option ppp-49-01 "m" = (no of pos x .03937[1.000]) + .030[.76] ref "p" = {("m" - .200[5.08]) / 2} .020[.51] fsi-xx-xx-d-t for 10 thru 50 positions with -m or -e option, -10 thru -50 without -m or -e option see note 6 "t" .315 8.00 "u" .020 0.51 fig 5 -k: polyamide film pad (use k-500-300) (available only on positions 40 & 50 with -m or -e option) "t" = (no of pos x .03937[1.000]) + .870[22.10] ref "u" = {("t" - .315[8.00]) / 2} .020[.51] "f" "e" pt-1-24-02-70 pt-1-24-03-101 pt-1-24-04-101 pt-1-24-02-106 (fsi-110-06-l-d-m shown) not available on 5 position not available if position is 05 and lead style is 06 sheet of 1mm single element interface by: fsi-1xx-xx-xxx-d-x-xx-xx dwg. no. description: do not scale drawing bratcher 1/29/99 3 3 sheet scale: 2:1 revision as f:\dwg\misc\mktg\fsi-1xx-xx-xxx-d-x-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
